T-88 Structural Epoxy Adhesive - System Three Resins

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions.

T-88 is a high-performance, non-brittle, two-part epoxy adhesive designed to give superior results under adverse conditions. The adhesive may be used without modifications in normally fitted joints, and will cure in any thickness without shrinkage. T-88 is clear amber and becomes virtually invisible when varnished. T-88 exhibits outstanding adhesion and permanence on a wide variety of materials, and is endorsed by leading designers, builders and organizations.

System Three 1100K10 Amber T-88 Kit 0.5 Pint Bottle

Silvertip GelMagic is a two component, structural epoxy adhesive that has exceptional non-sag and gap filling characteristics. Because GelMagic is toughened, it can be used in the most demanding industrial, marine and woodworking applications. GelMagic has exceptionally high peel strength and exhibits outstanding elevated temperature performance. Also, of note is GelMagic's indicator dye that disappears when completely mixed.

System Three 1230K44 Tan Silvertip GelMagic Kit, 3 Quart Bottle

What type of Epoxy? LumberJocks Woodworking Forum

For over 35 years, G-2 has been an excellent epoxy adhesive choice for oily, acidic hardwoods like teak and other tropical woods. Use it for gluing oak and cedar, as well as other materials that are difficult to bond. G-2 was developed primarily for waterproof bonding of rot-resistant woods used in fine yacht joinery. Use G-2 for both interior and exterior applications as well as below the waterline. G-2 can be mixed in small or large batches, has a long pot life and cures overnight.

System Three G-2 Epoxy Glue Kit, 12 oz.

System Three T-88 Epoxy - StewMac

G-2 - System Three Resins

MetlWeld is a super tough epoxy adhesive designed to bond dissimilar materials such as steel to wood. MetlWeld exhibits excellent elastic properties and superior bond strength while remaining rigid. MetlWeld will bond to stainless steel, galvanized steel, aluminum, copper, glass, ceramic, neoprene rubber and most porous surfaces. For use in high stress applications when bonding metals to materials such as glass, composites, wood and concrete. 100% waterproof.

System Three Metlweld Epoxy Adhesive, 8oz Kit

For well over 25 years T-88 has been the most widely used structural adhesive for marine and general woodworking use in the United States. Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures as low as 35oF. When fully cured, it is unaffected by water, oil, kerosene, and many other chemicals. It will not stain wood and is immune to fungus and rot. T-88 is unique in that it may be applied to damp wood, provided it is worked well into the surface.

System Three 1100K90 Amber T-88, 50 ml Cartridge, 1.69 oz. Bottle

The u-TAH Cartridge format is both simple and easy. Just drop it into a conventional caulking gun, add a Turbo Mixing Tip (#52886), squeeze, and apply. What could be easier? Only need a little bit and don't want to use a tip? Then squeeze out some into a cup, mix and apply. In either case the cartridge properly measures the resin and hardener and can never get the ratio wrong.

System Three 1100K91 Amber T-88 u-TAH Cartridge (Includes 1 Tip), 8.4 oz. Bottle

System Three T-88 Epoxy Adhesive, 1 Pt Bottle, Amber: Molding And

These System 3 General Purpose Epoxy Kits each come with a different hardener for use in different working temperatures and providing varous working times. The General Purpose Epoxy System contains 30% plant derived material and has never contained any volatile organic compounds. When selecting a kit, consider both the minimum temperature during application and the desired working time that is appropriate for your application.