R410a, 410, Do-It-Yourself Recharge Kit, Includes System Sealer

This kit is especially designed for the Do-It-Yourself-er 

Includes DETAILED charging and testing instructions and includes the System Sealer called Pro-Seal XL4.

This kit includes refrigerant AND system sealer.

This kit is for recharging or topping off a Refrigerant R-410a System and adding Leak Stop to the system.

Refrigerant R410a is used on almost all NEW A/C Units and almost all of the new mini-split  A/C systems.

As R-22 is being phased out, R-410a is now the refrigerant found on all NEW A/C Systems.

This recharge kit includes;

(1) 28 oz. Can of R-410a with a 1/4 male flare fitting on top with internal valve core and brass cap as pictured.

(1) Reusable , Quick Connect (screw-on), Top Mount Can Taper with color coded charging gauge for R410a systems. The gauge is color coded in green so you know how much refrigerant to add and this information is included in the instructions we have provided!

(1)  SPECIAL, R410a, COLOR CODED, CHECK & CHARGE-IT  Gauge.

(1) CPS AD87 R410a adapter Fitting

(1) 36 Charging Hose

(1) Instructions on R410a systems.

(1) Thermometer for checking the suction line temperature, this is a very important step which is mentioned in the instructions.

(1) 1 Foot piece of foam tape used to attach the thermometer to the suction line. (see picture)

(1) Enviro-Safe ProSeal System sealer. This attaches to the unit first then attach the charging hose to the injector, add refrigerant as needed will push the sealer into the system, no mess, no additional cans needed, when does installing the injector, you can simply dispose of it. Add refrigerant as needed according to the instructions.

Normal R410a low-side system pressure while unit is running is; 125 to 150 psi. depending on the outdoor and indoor temperature.

Some R410a systems still use the 1/4 male flare so in this case the charging hose with this kit will connect directly onto it.

The charging hose on this kit has the larger 5/16 connection with valve core depressor.

You will need this special hose because the new size found on almost all mini-splits and some R410a A/C systems is now larger (5/16) to prevent mixing,  so now you will have everything you need to recharge a R410a system. 

R410a Refrigerant does NOT require EPA certification to purchase.

FOR USE ONLY IN AIR CONDITIONING SYSTEMS DESIGNED FOR R410A.

DO NOT MIX WITH ANY OTHER REFRIGERANT.

 Refrigerant Can Notes

**WARNING**

*ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.

*ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.

*CONTENT UNDER PRESSURE.

*VAPOR HARMFUL SKIN AND EYE IRRITANT.

DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO

 BURST AND RESULT IN SERIOUS INJURY.

ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.

USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.

DO NOT MIX WITH ANY OTHER REFRIGERANT.

FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!

DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.

HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.

DO NOT PUNCTURE OR INCINERATE THIS CAN.

DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.

Do not refill can.

KEEP OUT OF REACH OF CHILDREN.

*061422-30