STL file Kindle Fire HD8 2020 Gen10 Wall Mount 🔥・3D printer model to download・Cults

Wall mount designed for the Kindle Fire HD8, 10th Generation released in 2020. Primarily intended as a dashboard for home automation systems such as Home Assistant. Designed to use a readily available 90 degree USB-C Cable (UGREEN) and hide the cable from view. A spacer allows the tablet to 'float' away from the wall, while allowing the USB cable to enter a wall box. Mounting holes are provided for direct attachment to both UK (60mm hole spacing) and US (83.34mm hole spacing) single back boxes with additional mounting holes for screwing directly to a wall if needed. There is also an extension to the power button, allowing the tablet to be shut down/restarted while in the mount. **PRINT SIZE - IMPORTANT!** **The front frame requires a print bed that is 231mm wide.** Please ensure you can print this size before buying the STLs! I have printed this design on an Ender 3 without issue. Also tested on an Ender 5 but I did have to change the maximum bed size via a firmware modification - I am using TH3D Unified Firmware so you may not have to make this change. **CHECK YOUR PRINTABLE AREA BEFORE BUYING - WE WILL NOT PROVIDE REFUNDS IF THIS DESIGN IS TOO BIG FOR YOUR PRINTER - YOU HAVE BEEN WARNED** **PERSONAL USE ONLY!** Files are provided for personal use only. Sharing the files or selling printed versions is strictly prohibited without express permission. **UPDATE - 28th July 2023** Added 'reduced tolerance' versions of the front and rear frame. The originals are ever so slightly loose when printed on Bambu Lab printers. These versions improve the fit of the tablet and front frame. May also be useful for printers with linear advance enabled.