PETG - Pro Series Filament - 3DMaker Engineering
Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts outperform
Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts outperform your design requirements.
Filament Specs:
Hotend Temperature (°C): 220-245 (Recommended: 230)
Bed Temperature (°C): 75-85 (Recommended: 80)
Filament Diameter (mm): 1.75±0.05
Net Weight: 1kg (2.2 lbs)
Build Surface: Polypropylene or PEI
Print Parameters:
We have spent thousands of hours testing our filament with several printer types and recommend these printing settings.
Default Print Speed: 30-60 mm/s (Recommended: 40 mm/s)
First Layer Height: 0.28 mm*
First Layer Speed: 15 mm/s
Extrusion Width: 0.48 for 0.4 Nozzle (1.2X Nozzle Diameter)
Retraction: Bowden 5mm @ 45 mm/s or Direct 2mm @ 45 mm/s
Perimeter Print Speed: 70% of Default Print Speed
Infill and Support Print Speed: 80% of Default Print Speed
Fan Profile:
Layer 1: 0%
Layer 3: 25%
Layer 5+: 50%
XY Jerk: 8
Z Jerk: 0.3
E Jerk: 5
Acceleration (Print/Travel): 300
Retract Acceleration: 1000
Travel Speed (non-print moves): 120 mm/s
*Special Notes:
Most users who are used to printing PLA tend to set their first layer height too low. PETG tends to build-up on the nozzle during the first layer causing adhesion issues. We recommend a first-layer thickness of 0.28mm.
🌳LOW TEMPERATURE RESISTANCE - Be used normally at -30℃, and other characteristics also remain outstanding, the lowest temperature resistance even up
JUSTMAKER PETG Pro (PETG+) 3D Printer Filament, Updated Stronger Impact Resistance, Dimensional Accuracy +/-0.03mm, 1.75mm, 1 kg, Black
FlashForge PETG Filament 1 KG – FlashForge USA
PRO Series Carbon Fiber PETG Filament - 1.75mm (1kg)
5/10/20KG SUNLU PLA+ PLA ABS PETG 3D Printer Filament 1.75mm Neatly Wound Lot
FlashForge PETG Filament 1 KG – FlashForge USA
Parthenon Gray Marble PRO Series PETG Filament - 1.75mm (1kg)
(Polyethylene Terepthalate Glycol-modified) is the common thermoplastics of the polyester family and is used in fibers for clothing, bottles for
PETG Filament
FlashForge PETG Filament 1 KG – FlashForge USA
3D Fusion PETG Filament 1.75mm Sky Blue 1kg – DIYElectronics
PETG Filament, 3D4Makers
JUSTMAKER PETG Pro (PETG+) 3D Printer Filament, Updated Stronger Impact Resistance, Dimensional Accuracy +/-0.03mm, 1.75mm, 1 kg, Blue Gray : Industrial & Scientific
The Recreator 3D - Make Recycled PET#1 3D Filament
3DMaker Engineering
Improve your print quality with our Pro Series PETG+ filament. We only use quality materials to produce our filament to ensure your printed parts
PETG+ Pro Series 3D Printer Filament 1.75mm